Brickwebb is quick and easy to install. It is similar to installing tile.
There are 4 simple steps to follow:
1. Apply adhesive to substrate (wall, surface, etc.) using a 3/8 inch notch trawl.
2. Begin the layout process by applying the Brickwebb outer corner sheets first. Press on each brick firmly allowing the adhesive to penetrate through the webbing onto the brick.
3. Next, apply the Brickwebb flat sheets. Overlap brick onto the exposed webbing and space evenly. Press each brick firmly into the adhesive. Allow to set for approximately 24 hours.
4. Apply grout using a grout bag or tile grout float. Once the grout is stiff to the touch (but not dry), finish grout using a tool and/or wet sponge smoothing grout lines and removing excess grout.